WILLIAMS SOUND DWS INT 4 400 RCH SYSTEM

WILLIAMS SOUND DWS INT 4 400 RCH SYSTEM

The Williams Sound Digi-Wave DWS INT 4 400 RCH is a completely portable wireless interpretation system for up to twenty-one listeners. Ideal when security, sound quality and flexibility are critical. Designed for medium size conferences, meetings or other events where delegates require language interpretation in one, two or three languages.



Details

General Description

The Williams Sound Digi-Wave DWS INT 4 400 RCH is a completely portable wireless interpretation system for up to twenty-one listeners. Ideal when security, sound quality and flexibility are critical. Designed for medium size conferences, meetings or other events where delegates require language interpretation in one, two or three languages.

The DWS INT 4 400 RCH is ideal for a shared language / one floor / two interpreter scenario: One DLT 400 transceiver is set up as body-worn transmitter to provide a direct audio feed from a speaker to two interpreters. Interpreters 1 and 2 then use second and third DLT 400's to both listen to the speaker and transmit their simultaneous interpretation to the audience on separate channels. The audience, using DLR receivers, can choose to listen to the floor language on CH 0 (for hearing assistance), or the interpreters on CH 1 or CH 2.

Another way the system can be used is in a single-language interpretation scenario.  Here, the interpreters can work together by "spelling" each other (giving each other a break), interpreting into the same language for long jobs. In this scenario, both interpreters use DLTs to listen to the floor on channel 0, and take turns interpreting the same language on the same channel - by switching one unit on when the first interpreter speaks, then switching that unit off and switching the second interpreter's unit on.  Each interpreter must toggle on/off by pushing the TALK button – leaving only one TALK button on at any one time.

Alternatively, three interpreters can listen to the PA system or speaker directly and use the DLT 400 transceivers for interpretation into three different languages.

This system can serve up to twenty-one listeners. Additional DLT 400's can be purchased separately to accommodate up to 14 additional languages. Additional DLR receivers can be purchased separately to accommodate additional listeners. This system can serve an unlimited number of listeners within the recommended range.

Digital encryption and frequency-hopping technologies provide both secure and clear communication between the team. As the system can be used licence-free on all continents it is ideal for international travel.

For more information please click here.

Features

Complete portable one, two or three language interpretation system
Slim, lightweight, and simple to set up and use
Up to 30m range
Simplified menu system via large OLED screen
2.4 GHz licence-free operation
87-bit encryption and frequency-hopping technology
Programable mic button
Single four pole jack socket
USB-C charging ports
Two twelve slot chargers
Protective transport case included
Lightweight single sided headsets for the interpreters
Single sided lightweight earphones for the delegates

Delivery Includes

3 DLT 400 transceivers
21 DLR 400 RCH receivers
3 MIC 144 headset microphones
21 EAR 022 surround earphones
2 CHG 412 PRO 12-bay charger
1 CCS 056 transport and storage case
2 CCS 061 GR grey silicone skin
1 CCS 061 BK silicone skin

Technical data

DLT 400 Digital Transceiver
Dimensions: 107.3 mm x 66 mm x 12.6 mm
Weight: 94 g including battery
Colour: Black/Silver (Front/Back)
Case Material: Black ABS plastic
Battery type: Lithium Polymer with smart charge built into transceiver; 1800 mAH
Battery life: Up to 16 hrs talk time per charge@ 1ch Tx and 1ch Rx
Power Save: Auto Sleep Mode after 5 minutes of no RF signal from compatible devices
Charge time: 5 hrs. approx.
Operating frequencies: 2.4 GHz (ISM band); 2402 – 2476 MHz FHSS
Audio Frequency response (-3dB Level): Intercom Mode: 100 - 7,200 Hz, Other Modes: 100 - 11,500 Hz
SNR: 73 dB (A-weighted, default Rx volume with mic input)
THD: 0.1 % (Default Volume, 1kHz)
Microphone input: Internal microphone (disabled when MIC jack engaged) and 3.5 mm phone jack (sleeve) with electret microphone bias, adjustable gain with 63dB range.
Line Input: USB-C
Headphone Output: 3.5 mm TRRS headphone jack; 25 mW, R 32 ohms
Audio Output: Max SSPL 90 111.8dB (EAR 013), 116.8dB (EAR 041)
Range: Up to 900 ft (274 m) (depending upon environmental conditions)
Modulation: FSK
RF Output: 19 dBm Typical
Security: 87 bit encryption (300 Series Compatible), 87+128 bit Encryption, Encryption PIN, Lock for settings
Side tone: -6 dB below volume, tone variation (Off, Low and High settings available)
Indicators: OLED
LEDs: Red LED around Talk button when enabled; Bi-colour, changing green and red LED at top
Charging Connectors: USB-C; Two contacts for use with CHG 412
Compatible Receiver: DLR 400 RCH, DLR 400 ALK, DLT 300 with some limitations and DLR 360 with some limitations
Operating Temperature Range: -10º to 45ºC
DLR 400 RCH
Dimensions: H x 107.3 mm W x 66 mm H x 12.6 mm
Weight: 94 g including battery
Colour: Black
Battery type: Lithium Polymer with smart charge built into transceiver; 1800 mAH
Battery life: Up to 32 hrs per charge @ 1ch Rx
Power Save: Auto Sleep Mode after 5 minutes of no RF signal from compatible devices
Charge time: 5 hrs. approx.
Operating frequencies: 2.4 GHz (ISM band); 2402 – 2476 MHz FHSS
Audio Frequency response (-3dB Level): Intercom Mode: 100 - 7,200 Hz, Other Modes: 100 - 11,500 Hz
SNR: 73 dB (A-weighted)
THD: 0.1 % (Default Volume, 1kHz)
Headphone Output: 3.5 mm TRRS headphone jack; 25 mW, R32 Ω
Range: Up to 900 ft (274 m) (depending upon environmental conditions)
Modulation: FSK
RF Sensitivity: -92 dBm
Security: 87-bit encryption (300 Series Compatible), 87+128-bit Encryption, Encryption PIN, Lock for settings
Indicators: OLED
LEDs: Bi-colour, changing green and red LED at top
Charging Connectors: USB-C; Two contacts for use with CHG 412
Compatible Units: DLT 400, DLT 300 with some limitations
Operating Temperature Range: -10º to 45ºC
EAR 022
Style: Around-ear speaker
Plug: 3.5mm mono
Cord: 39"
Driver Size: 23 mm
Nominal Impedance: 32Ω
Freq. Response: 20 - 20kHz
Weight: 15g
Max Power Input: 30 mW
Sensitivity: 118 dB @ 1kHz
CCS 056
Interior Dimensions: W x 33 cm L x 46 cm H x 17 cm
Exterior Dimensions    : W x 40 cm H x 50 cm H x 18 cm
Lid Inner Depth: 4 cm
Bottom Inner Depth: 13 cm
Approx. weight (empty): 3 kg
Material: Copolymer
Minimum Temperature: -40ºC
Maximum Temperature: 71.1ºC

Downloads

New Williams Sound Digi-Wave 400 system overview

Williams Sound Digi Wave 400 series manual

Williams Sound DLT 400 and DLR 400 RCH quick guide

Williams Sound DigiWave DLR 400 ALK quick guide

Williams Sound Digi-Wave 400 firmware guide

Williams Sound DLT 400 specifications

Williams Sound Digi-Wave 400 series white paper

Williams Sound Digi Wave 400 series security